diff --git a/README.md b/README.md
index 22ea39c..d926748 100644
--- a/README.md
+++ b/README.md
@@ -26,10 +26,10 @@ A 3D-printable enclosure for the [Waveshare ESP32-P4-WiFi6-Touch-LCD-4.3](https:
 
 ![Assembly](Photos/Assembly.jpg)
 
-- Mount the board using **M2.5 screws** (6 mm or 8 mm length recommended)
+- Battery taped to inside of enclosure (Battery not compulsory for this project - it can be run off USB Power)
+- Mount the board using **M2.5 screws** (6 mm - 8 mm length recommended)
 - The enclosure has an outer protective rim that frames the 4.3" screen
-- A **1000mAh battery** (model 503450, [available on AliExpress](https://aliexpress.com/item/1005008707394961.html)) fits snug inside. Note: the units received are mislabeled as "100mAh" in the photos, but they are actually 1000mAh.
-- The battery uses an **MX1.25 connector**, which matches the development board's battery connector. No rewiring needed.
+- A **1000mAh battery** (model 503450, [available on AliExpress](https://aliexpress.com/item/1005008707394961.html)) fits snug inside. Note: the units received were mislabeled as "100mAh" in the photos, but they are actually 1000mAh. The battery uses an **MX1.25 connector**, which matches the development board's battery connector. No rewiring needed.
 
 ## Kern Project